IEC 61076-4-105:1995

Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105 : Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication .

Connecteurs sous assurance de la qualité, pour utilisation dans le cadre d'applications analogiques c.c. et à basse fréquence et dans le cadre d'applications numériques utilisant des débits élevés pour le transfert des données - Partie 4: Connecteurs pour cartes imprimées - Section 105: Spécification particulière d'un connecteur circulaire de 9 mm, de 3 à 8 contacts, à utiliser dans une large gamme d'applications incluant les
télécommunications et le grand public

Fecha:

1995-06-19 /Vigente

Resumen (inglés):

IEC 61076-4-105:1995 is a detail specification. A complete connector consists of a fixed connector and a free connector. The fixed connector is mounted vertically or at a right angle to the printed circuit board. The free connector is terminated to a cable consisting of three to eight conductors (shielded or unshielded). The fixed and the free connector have a range of three to eight contacts. Each connector is keyed to prevent mismating. Examples of contact arrangements are shown in figure 2. Rating and characteristics: Wording voltage: 30 V a.c. r.m.s. or d.c. Current rating: 1 A max. Insulation resistance: 1 000 M ohms min. Climatic category: PL1: 55/100/56, PL2: 55/100/21, PL3: Not applicable Printed board thickness: 1,58 mm (0,062 in) Contact spacing: varies with number of contacts.

Resumen (francés):

Comprar en AENOR

Esta norma está disponible en:

Formato digital

Bilingue