Para búsqueda de normas ISO e IEC, utilizar términos en inglés
Limpiar filtros Aplicar
Resultados para:
Número de resultados: 189
UNE-EN IEC 62541-14:2020 UNE
Estado: Vigente / 2020-10-01
Arquitectura unificada OPC. Parte 14: PubSub (Ratificada por la Asociación Española de Normalización en octubre de 2020.)
CTN 203/SC 65 Medida y control de procesos industriales-fieldbus
UNE-EN IEC 62541-10:2020 UNE
Arquitectura unificada OPC. Parte 10: Programas (Ratificada por la Asociación Española de Normalización en octubre de 2020.)
UNE-EN IEC 62541-13:2020 UNE
Estado: Vigente / 2020-09-01
Arquitectura unificada OPC. Parte 13: Agregados (Ratificada por la Asociación Española de Normalización en septiembre de 2020.)
UNE-EN IEC 62541-9:2020 UNE
Arquitectura unificada OPC. Parte 9: Alarmas y estados (Ratificada por la Asociación Española de Normalización en septiembre de 2020.)
UNE-EN IEC 62541-7:2020 UNE
Arquitectura unificada OPC. Parte 7: Perfiles (Ratificada por la Asociación Española de Normalización en septiembre de 2020.)
UNE-EN ISO 4957:2019 UNE
Estado: Vigente / 2019-04-24
Aceros para herramientas. (ISO 4957:2018).
CTN 36 Siderurgia
UNE 88412:2006 UNE
Estado: Vigente / 2016-12-21
Productos de fibrocemento NT (sin amianto ). Directrices para su corte y mecanizado en obra.
CTN 88 Productos de cemento reforzado con fibras
UNE-EN 62541-100:2015 UNE
Estado: Vigente / 2015-06-01
Arquitectura unificada OPC. Parte 100: Interfaz de dispositivo (Ratificada por AENOR en junio de 2015.)
UNE-EN 62541-10:2015 UNE
Arquitectura unificada OPC. Parte 10: Programas (Ratificada por AENOR en junio de 2015.)
UNE-EN 62541-13:2015 UNE
Arquitectura unificada OPC. Parte 13: Agregados (Ratificada por AENOR en junio de 2015.)
UNE-EN 62541-7:2015 UNE
Arquitectura unificada OPC. Parte 7: Perfiles (Ratificada por AENOR en junio de 2015.)
UNE-EN 62541-9:2015 UNE
Arquitectura unificada OPC. Parte 9: Alarmas y estados (Ratificada por AENOR en junio de 2015.)
UNE 16149-1/1C:1986 UNE
Estado: Vigente / 1986-05-15
Geometría de la parte activa de las herramientas de corte. Generalidades, sistemas de referencia, ángulos de la herramienta y ángulos en trabajo. Primer complemento.
CTN 16 Herramientas
UNE 16152:1985 UNE
Estado: Vigente / 1985-01-15
Herramientas de corte único. Radio de la punta.
UNE 16118:1984 UNE
Estado: Vigente / 1984-12-15
Plaquitas de fijación mecánica facetadas tipo: TPAN-TPCN-TPKM.
UNE 16117:1984 UNE
Estado: Vigente / 1984-09-15
Plaquitas de fijación mecánica facetadas. Tipos SNAN-SNCN-SNKN-SPAN-SPCN-SPKN.
UNE 16115:1983 UNE
Estado: Vigente / 1983-05-15
Plaquitas de fijación mecánica. Tipos TNUN-TNGN-TPUN-TPGN.
UNE 16116:1983 UNE
Plaquitas de fijación mecánica. Tipos SNUN-SNGN-SPUN-SPGN.
UNE 16120:1983 UNE
Plaquitas de metal duro para herramientas especiales. Tipo G, H y J.
UNE 16164:1982 UNE
Estado: Vigente / 1982-11-15
Plaquitas de metal duro para roscar.
UNE 16149-1:1982 UNE
Estado: Vigente / 1982-10-15
Geometría de la parte activa de las herramientas de corte. Generalidades, sistemas de referencia, ángulos de la herramienta y ángulos en trabajo.
UNE 16100:1982 UNE
Estado: Vigente / 1982-09-15
Plaquitas de metal duro. Grupos de empleo.
UNE 16002:1975 UNE
Estado: Vigente / 1975-04-15
Herramientas de corte. Clasificaciones.
UNE 16131:1975 UNE
Estado: Vigente / 1975-02-15
Diámetros de mango y cuadrados de arrastre para herramientas giratorias.
UNE 16113:1975 UNE
Código para designación de plaquitas de carburos metálicos, y de cerámica, para herramientas de fijación mecánica.
ISO 22180:2019 ISO
Estado: Published / 2019-01-10
CVD diamond tools — Categorization
ISO 16084:2017 ISO
Estado: Published / 2017-10-25
Balancing of rotating tools and tool systems
ISO 3364:2017 ISO
Estado: Published / 2017-08-09
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions
ISO 1832:2017 ISO
Estado: Published / 2017-02-27
Indexable inserts for cutting tools — Designation
ISO 3286:2016 ISO
Estado: Published / 2016-03-04
Single point cutting tools — Corner radii
ISO 3365:2016 ISO
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions
ISO 5611-4:2015 ISO
Estado: Published / 2015-11-18
Cartridges, type A, for indexable inserts — Part 4: Style J
ISO 5611-5:2015 ISO
Cartridges, type A, for indexable inserts — Part 5: Style K
ISO 5611-1:2015 ISO
Cartridges, type A, for indexable inserts — Part 1: General survey, correlation and determination of dimensions
ISO 5611-2:2015 ISO
Cartridges, type A, for indexable inserts — Part 2: Style F
ISO 5611-3:2015 ISO
Cartridges, type A, for indexable inserts — Part 3: Style G
ISO 5611-6:2015 ISO
Cartridges, type A, for indexable inserts — Part 6: Style L
ISO 5611-7:2015 ISO
Cartridges, type A, for indexable inserts — Part 7: Style R
ISO 5611-8:2015 ISO
Cartridges, type A, for indexable inserts — Part 8: Style S
ISO 5611-9:2015 ISO
Cartridges, type A, for indexable inserts — Part 9: Style T
ISO 5611-10:2015 ISO
Cartridges, type A, for indexable inserts — Part 10: Style U
ISO 5611-11:2015 ISO
Cartridges, type A, for indexable inserts — Part 11: Style W
ISO 5611-12:2015 ISO
Cartridges, type A, for indexable inserts — Part 12: Style Y
ISO 5610-15:2014 ISO
Estado: Published / 2014-08-21
Tool holders with rectangular shank for indexable inserts — Part 15: Style V
ISO 5610-11:2014 ISO
Tool holders with rectangular shank for indexable inserts — Part 11: Style R
ISO 5610-12:2014 ISO
Tool holders with rectangular shank for indexable inserts — Part 12: Style S
ISO 5610-13:2014 ISO
Tool holders with rectangular shank for indexable inserts — Part 13: Style T
ISO 5610-14:2014 ISO
Tool holders with rectangular shank for indexable inserts — Part 14: Style H
ISO 5610-1:2014 ISO
Tool holders with rectangular shank for indexable inserts — Part 1: General survey, correlation and determination of dimensions
ISO 5610-2:2014 ISO
Tool holders with rectangular shank for indexable inserts — Part 2: Style A