Saltar navegación principal
Estás en: Home>Encuentra tu norma>Busca tu norma
Refina tu búsqueda
Normas

Para búsqueda de normas ISO e IEC, utilizar términos en inglés

Estado
Idioma

Busca tu norma

Busca tu norma

Busca tu norma

Resultados para:

Número de resultados: 51

UNE-EN 1012-1:2011  UNE

Estado: Vigente / 2011-03-16

Compresores y bombas de vacío. Requisitos de seguridad. Parte 1: Compresores de aire

CTN 62/SC 3 MAQUINARIA PARA MANIPULACIÓN DE FLUIDOS

UNE-EN 1012-3:2013  UNE

Estado: Vigente / 2019-09-11

Compresores y bombas de vacío. Requisitos de seguridad. Parte 3: Compresores de proceso (Ratificada por AENOR en enero de 2014.)

CTN 62/SC 3 MAQUINARIA PARA MANIPULACIÓN DE FLUIDOS

UNE-EN 1012-2:1996+A1:2010  UNE

Estado: Vigente / 2019-03-18

Compresores y bombas de vacío. Requisitos de seguridad. Parte 2: Bombas de vacío.

CTN 62/SC 3 MAQUINARIA PARA MANIPULACIÓN DE FLUIDOS

ISO 27893:2011  ISO

Estado: Vigente / 2011-08-10

Vacuum technology -- Vacuum gauges -- Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge

ISO 19685:2017  ISO

Estado: Vigente / 2017-09-20

Vacuum technology -- Vacuum gauges -- Specifications, calibration and measurement uncertainties for Pirani gauges

ISO 3567:2011  ISO

Estado: Vigente / 2011-12-09

Vacuum gauges -- Calibration by direct comparison with a reference gauge

ISO 3530:1979  ISO

Estado: Vigente / 1979-09-01

Vacuum technology -- Mass-spectrometer-type leak-detector calibration

ISO 3529-1:2019  ISO

Estado: Vigente / 2019-07-16

Vacuum technology -- Vocabulary -- Part 1: General terms

ISO 20146:2019  ISO

Estado: Vigente / 2019-01-31

Vacuum technology -- Vacuum gauges -- Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges

ISO 21360-3:2019  ISO

Estado: Vigente / 2019-01-30

Vacuum technology -- Standard methods for measuring vacuum pump performance -- Part 3: Specific parameters for mechanical booster vacuum pumps

ISO 21360-4:2018  ISO

Estado: Vigente / 2018-07-31

Vacuum technology -- Standard methods for measuring vacuum-pump performance -- Part 4: Turbomolecular vacuum pumps

ISO/TS 20177:2018  ISO

Estado: Vigente / 2018-06-12

Vacuum technology -- Vacuum gauges -- Procedures to measure and report outgassing rates

ISO/TS 20175:2018  ISO

Estado: Vigente / 2018-05-03

Vacuum technology -- Vacuum gauges -- Characterization of quadrupole mass spectrometers for partial pressure measurement

ISO 3669:2017  ISO

Estado: Vigente / 2017-08-10

Vacuum technology -- Bakeable flanges -- Dimensions of knife-edge flanges

ISO 3529-3:2014  ISO

Estado: Vigente / 2014-04-10

Vacuum technology -- Vocabulary -- Part 3: Total and partial pressure vacuum gauges

ISO 2861:2013  ISO

Estado: Vigente / 2013-04-17

Vacuum technology -- Dimensions of clamped-type quick-release couplings

ISO 14291:2012  ISO

Estado: Vigente / 2012-07-06

Vacuum gauges -- Definitions and specifications for quadrupole mass spectrometers

ISO 21360-2:2012  ISO

Estado: Vigente / 2012-04-20

Vacuum technology -- Standard methods for measuring vacuum-pump performance -- Part 2: Positive displacement vacuum pumps

ISO 21360-1:2012  ISO

Estado: Vigente / 2012-04-20

Vacuum technology -- Standard methods for measuring vacuum-pump performance -- Part 1: General description

ISO 27892:2010  ISO

Estado: Vigente / 2010-01-22

Vacuum technology -- Turbomolecular pumps -- Measurement of rapid shutdown torque

ISO 27894:2009  ISO

Estado: Vigente / 2009-11-30

Vacuum technology -- Vacuum gauges -- Specifications for hot cathode ionization gauges

ISO 27895:2009  ISO

Estado: Vigente / 2009-11-30

Vacuum technology -- Valves -- Leak test

ISO 9803-1:2007  ISO

Estado: Vigente / 2007-05-07

Vacuum technology -- Mounting dimensions of pipeline fittings -- Part 1: Non knife-edge flange type

ISO 9803-2:2007  ISO

Estado: Vigente / 2007-05-07

Vacuum technology -- Mounting dimensions of pipeline fittings -- Part 2: Knife-edge flange type

ISO 21358:2007  ISO

Estado: Vigente / 2007-04-17

Vacuum technology -- Right-angle valve -- Dimensions and interfaces for pneumatic actuator

ISO 1608-1:1993  ISO

Estado: Vigente / 1993-11-25

Vapour vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed)

ISO 1608-2:1989  ISO

Estado: Vigente / 1989-11-30

Vapour vacuum pumps -- Measurement of performance characteristics -- Part 2: Measurement of critical backing pressure

ISO 1609:1986  ISO

Estado: Vigente / 1986-03-06

Vacuum technology -- Flange dimensions

ISO 3529-2:1981  ISO

Estado: Vigente / 1981-12-01

Vacuum technology -- Vocabulary -- Part 2: Vacuum pumps and related terms

UNE-ENV 12977-1:2002  UNE

Estado: Anulada / 2012-11-14

Sistemas solares térmicos y sus componentes. Instalaciones a medida. Parte 1: Requisitos generales.

CTN 94 ENERGÍA SOLAR TÉRMICA

UNE-EN 1012-1:1996  UNE

Estado: Anulada / 2012-10-01

Compresores y bombas de vacío. Requisitos de seguridad. Parte 1: Compresores.

CTN 62/SC 3 MAQUINARIA PARA MANIPULACIÓN DE FLUIDOS

UNE-EN 1012-2:1996  UNE

Estado: Anulada / 2010-02-17

Compresores y bombas de vacío. Requisitos de seguridad. Parte 2: Bombas de vacío.

CTN 62/SC 3 MAQUINARIA PARA MANIPULACIÓN DE FLUIDOS

UNE 1097:1983  UNE

Estado: Anulada / 2005-02-03

Técnica del vacío. Símbolos gráficos.

CTN 1 NORMAS GENERALES

ISO 3529-1:1981  ISO

Estado: Anulada / 2019-07-16

Vacuum technology -- Vocabulary -- Part 1: General terms

ISO 5302:2003  ISO

Estado: Anulada / 2018-11-29

Vacuum technology -- Turbomolecular pumps -- Measurement of performance characteristics

ISO/TS 3669-2:2007  ISO

Estado: Anulada / 2017-08-10

Vacuum technology -- Bakable flanges -- Part 2: Dimensions of knife-edge flanges

ISO 3529-3:1981  ISO

Estado: Anulada / 2014-04-10

Vacuum technology -- Vocabulary -- Part 3: Vacuum gauges

ISO 2861-1:1974  ISO

Estado: Anulada / 2013-04-17

Vacuum technology -- Quick-release couplings -- Dimensions -- Part 1: Clamped type

ISO 3669:1986  ISO

Estado: Anulada / 2013-03-14

Vacuum technology -- Bakable flanges -- Dimensions

ISO 1607-1:1993  ISO

Estado: Anulada / 2012-04-20

Positive-displacement vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed)

ISO 1607-2:1989  ISO

Estado: Anulada / 2012-04-20

Positive-displacement vacuum pumps -- Measurement of performance characteristics -- Part 2: Measurement of ultimate pressure

ISO 21360:2007  ISO

Estado: Anulada / 2012-04-20

Vacuum technology -- Standard methods for measuring vacuum-pump performance -- General description

ISO/TS 3567:2005  ISO

Estado: Anulada / 2011-12-09

Vacuum gauges -- Calibration by direct comparison with a reference gauge

ISO/TS 27893:2009  ISO

Estado: Anulada / 2011-08-10

Vacuum technology -- Vacuum gauges -- Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge

ISO 2861-2:1980  ISO

Estado: Anulada / 2010-07-19

Vacuum technology -- Quick release couplings -- Dimensions -- Part 2: Screwed type

ISO 9803:1993  ISO

Estado: Anulada / 2007-05-07

Vacuum technology -- Pipeline fittings -- Mounting dimensions

ISO 3753:1977  ISO

Estado: Anulada / 2004-03-23

Vacuum technology -- Graphical symbols

ISO 1607-1:1980  ISO

Estado: Anulada / 1993-11-25

Positive-displacement vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed)

ISO 1608-1:1980  ISO

Estado: Anulada / 1993-11-25

Vapour vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed)

ISO 1608-2:1978  ISO

Estado: Anulada / 1989-11-01

Vapour vacuum pumps -- Measurement of performance characteristics -- Part 2: Measurement of critical backing pressure

Número de resultados: 51

​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​