Saltar navegación principal
Estás en: Home>Encuentra tu norma>Busca tu norma

Para búsqueda de normas ISO e IEC, utilizar términos en inglés

Estado
Idioma
Busca tu norma

Busca tu norma


Resultados para:

Número de resultados: 105

UNE 7050-1:1997  UNE

Estado: Vigente / 2010-05-06

Tamices y tamizado de ensayo. Parte 1: Vocabulario.

CTN 7 ENSAYOS DE MATERIALES

UNE 7050-2:1997  UNE

Estado: Vigente / 2010-05-06

Tamices y tamizado de ensayo. Parte 2: Telas metálicas, chapas perforadas y láminas electroformadas. Medidas nominales de las aberturas.

CTN 7 ENSAYOS DE MATERIALES

UNE 7050-3:1997  UNE

Estado: Vigente / 2010-05-06

Tamices y tamizado de ensayo. Parte 3: Exigencias técnicas y verificaciones de los tamices de ensayo de tela metálica.

CTN 7 ENSAYOS DE MATERIALES

UNE 7050-4:1997  UNE

Estado: Vigente / 2010-05-06

Tamices y tamizado de ensayo. Parte 4: Exigencias técnicas y verificación de tamices de chapa perforada.

CTN 7 ENSAYOS DE MATERIALES

UNE 7050-5:1997  UNE

Estado: Vigente / 2010-05-06

Tamices y tamizado de ensayo. Parte 5: Exigencias técnicas y verificaciones de los tamices de ensayo en láminas electroformadas.

CTN 7 ENSAYOS DE MATERIALES

UNE 7060-1:1997  UNE

Estado: Vigente / 2010-05-06

Representación de resultados obtenidos por análisis granulométrico. Parte 1: Representación gráfica.

CTN 7 ENSAYOS DE MATERIALES

UNE-ISO 9277:2009  UNE

Estado: Vigente / 2009-02-11

Determinación del área superficial específica de los sólidos mediante la adsorción de gas utilizando el método BET.

CTN 7 ENSAYOS DE MATERIALES

ISO/FDIS 13322-2  ISO

Estado: Draft (Approval) / 2021-07-21

Particle size analysis — Image analysis methods — Part 2: Dynamic image analysis methods

ISO/FDIS 15901-2  ISO

Estado: Draft (Approval) / 2021-06-17

Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption — Part 2: Analysis of nanopores by gas adsorption

ISO 21501-4:2018/DAmd 1  ISO

Estado: Draft (Enquiry) / 2021-06-09

Determination of particle size distribution — Single particle light interaction methods — Part 4: Light scattering airborne particle counter for clean spaces — Amendment 1

ISO/DIS 20804  ISO

Estado: Draft (Enquiry) / 2021-05-18

Determination of the specific surface area of porous and particulate systems by small-angle X-ray scattering (SAXS)

ISO 13319-1:2021  ISO

Estado: Published / 2021-03-18

Determination of particle size distribution — Electrical sensing zone method — Part 1: Aperture/orifice tube method

ISO 15900:2020  ISO

Estado: Published / 2020-10-20

Determination of particle size distribution — Differential electrical mobility analysis for aerosol particles

ISO 17867:2020  ISO

Estado: Published / 2020-10-05

Particle size analysis — Small angle X-ray scattering (SAXS)

ISO 14411-2:2020  ISO

Estado: Published / 2020-09-30

Preparation of particulate reference materials — Part 2: Polydisperse spherical particles

ISO/TR 22814:2020  ISO

Estado: Published / 2020-04-14

Good practice for dynamic light scattering (DLS) measurements

ISO 13320:2020  ISO

Estado: Published / 2020-01-06

Particle size analysis — Laser diffraction methods

ISO 21501-3:2019  ISO

Estado: Published / 2019-11-22

Determination of particle size distribution — Single particle light interaction methods — Part 3: Light extinction liquid-borne particle counter

ISO 21501-2:2019  ISO

Estado: Published / 2019-11-21

Determination of particle size distribution — Single particle light interaction methods — Part 2: Light scattering liquid-borne particle counter

ISO 14488:2007/Amd 1:2019  ISO

Estado: Published / 2019-11-15

Particulate materials — Sampling and sample splitting for the determination of particulate properties — Amendment 1

ISO 18747-2:2019  ISO

Estado: Published / 2019-07-03

Determination of particle density by sedimentation methods — Part 2: Multi-velocity approach

ISO/TR 19997:2018  ISO

Estado: Published / 2018-09-19

Guidelines for good practices in zeta-potential measurement

ISO 21501-4:2018  ISO

Estado: Published / 2018-05-18

Determination of particle size distribution — Single particle light interaction methods — Part 4: Light scattering airborne particle counter for clean spaces

ISO 18747-1:2018  ISO

Estado: Published / 2018-03-22

Determination of particle density by sedimentation methods — Part 1: Isopycnic interpolation approach

ISO 9276-4:2001/Amd 1:2017  ISO

Estado: Published / 2017-11-01

Representation of results of particle size analysis — Part 4: Characterization of a classification process — Amendment 1: Additional explanations and minor corrections

ISO/TS 14411-1:2017  ISO

Estado: Published / 2017-05-10

Preparation of particulate reference materials — Part 1: Polydisperse material based on picket fence of monodisperse spherical particles

ISO 20998-3:2017  ISO

Estado: Published / 2017-04-21

Measurement and characterization of particles by acoustic methods — Part 3: Guidelines for non-linear theory

ISO 22412:2017  ISO

Estado: Published / 2017-02-06

Particle size analysis — Dynamic light scattering (DLS)

ISO 19430:2016  ISO

Estado: Published / 2016-12-15

Particle size analysis — Particle tracking analysis (PTA) method

ISO 3310-1:2016  ISO

Estado: Published / 2016-07-21

Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth

ISO 15901-1:2016  ISO

Estado: Published / 2016-04-04

Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption — Part 1: Mercury porosimetry

ISO 27891:2015  ISO

Estado: Published / 2015-02-27

Aerosol particle number concentration — Calibration of condensation particle counters

ISO 13317-4:2014  ISO

Estado: Published / 2014-11-14

Determination of particle size distribution by gravitational liquid sedimentation methods — Part 4: Balance method

ISO 13099-3:2014  ISO

Estado: Published / 2014-06-23

Colloidal systems — Methods for zeta potential determination — Part 3: Acoustic methods

ISO 13322-1:2014  ISO

Estado: Published / 2014-05-12

Particle size analysis — Image analysis methods — Part 1: Static image analysis methods

ISO 9276-2:2014  ISO

Estado: Published / 2014-05-12

Representation of results of particle size analysis — Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions

ISO 12154:2014  ISO

Estado: Published / 2014-03-19

Determination of density by volumetric displacement — Skeleton density by gas pycnometry

ISO 3310-2:2013  ISO

Estado: Published / 2013-08-13

Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate

ISO 20998-2:2013  ISO

Estado: Published / 2013-08-07

Measurement and characterization of particles by acoustic methods — Part 2: Guidelines for linear theory

ISO 26824:2013  ISO

Estado: Published / 2013-07-15

Particle characterization of particulate systems — Vocabulary

ISO/TR 13097:2013  ISO

Estado: Published / 2013-05-30

Guidelines for the characterization of dispersion stability

ISO 9284:2013  ISO

Estado: Published / 2013-04-10

Abrasive grains — Test-sieving machines

ISO 13099-2:2012  ISO

Estado: Published / 2012-06-18

Colloidal systems — Methods for zeta-potential determination — Part 2: Optical methods

ISO 13099-1:2012  ISO

Estado: Published / 2012-06-18

Colloidal systems — Methods for zeta-potential determination — Part 1: Electroacoustic and electrokinetic phenomena

ISO 9277:2010  ISO

Estado: Published / 2010-08-20

Determination of the specific surface area of solids by gas adsorption — BET method

ISO 21501-1:2009  ISO

Estado: Published / 2009-05-22

Determination of particle size distribution — Single particle light interaction methods — Part 1: Light scattering aerosol spectrometer

ISO 9276-6:2008  ISO

Estado: Published / 2008-09-09

Representation of results of particle size analysis — Part 6: Descriptive and quantitative representation of particle shape and morphology

ISO 9276-3:2008  ISO

Estado: Published / 2008-06-24

Representation of results of particle size analysis — Part 3: Adjustment of an experimental curve to a reference model

ISO 14488:2007  ISO

Estado: Published / 2007-12-10

Particulate materials — Sampling and sample splitting for the determination of particulate properties

ISO 13318-2:2007  ISO

Estado: Published / 2007-09-18

Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 2: Photocentrifuge method

Número de resultados: 105

​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​