Busca tu norma

UNE-EN IEC 60545:2021  UNE

Estado: Vigente / 2021-10-01

Guía para la puesta en marcha y operación de turbinas hidráulicas, bombas de turbina y bombas de almacenamiento. (Ratificada por la Asociación Española de Normalización en octubre de 2021.)

UNE-EN 60609-1:2005  UNE

Estado: Vigente / 2005-10-26

Turbinas hidráulicas, bombas de acumulación y turbinas-bombas. Evaluación de la erosión por cavitación. Parte 1: Evaluación en las turbinas de reacción, bombas de acumulación y turbinas-bombas.

UNE-EN IEC 62364:2019  UNE

Estado: Vigente / 2019-04-01

Máquinas hidráulicas. Guía para el tratamiento de la erosión hidroabrasiva en turbinas Kaplan, Francis y Pelton. (Ratificada por la Asociación Española de Normalización en abril de 2019.)

ISO 23840:2021  ISO

Estado: Published / 2021-11-19

Water hydraulics — Water-hydraulic pumps — Methods of testing and representing basic steady-state performance

ISO 4409:2019  ISO

Estado: Published / 2019-07-11

Hydraulic fluid power — Positive-displacement pumps, motors and integral transmissions — Methods of testing and presenting basic steady state performance

ISO 10767-1:2015  ISO

Estado: Published / 2015-09-29

Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 1: Method for determining source flow ripple and source impedance of pumps

ISO 8426:2008  ISO

Estado: Published / 2008-01-22

Hydraulic fluid power — Positive displacement pumps and motors — Determination of derived capacity

ISO 3019-2:2001/Cor 1:2006  ISO

Estado: Published / 2006-12-01

Hydraulic fluid power — Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors — Part 2: Metric series — Technical Corrigendum 1

ISO 17559:2003  ISO

Estado: Published / 2003-11-24

Hydraulic fluid power — Electrically controlled hydraulic pumps — Test methods to determine performance characteristics

ISO 16902-1:2003  ISO

Estado: Published / 2003-05-20

Hydraulic fluid power — Test code for the determination of sound power levels of pumps using sound intensity techniques: Engineering method — Part 1: Pumps

ISO 4392-1:2002  ISO

Estado: Published / 2002-03-07

Hydraulic fluid power — Determination of characteristics of motors — Part 1: At constant low speed and constant pressure

ISO 4392-2:2002  ISO

Estado: Published / 2002-03-07

Hydraulic fluid power — Determination of characteristics of motors — Part 2: Startability

ISO 3019-2:2001  ISO

Estado: Published / 2001-06-21

Hydraulic fluid power — Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors — Part 2: Metric series

ISO 3019-1:2001  ISO

Estado: Published / 2001-05-31

Hydraulic fluid power — Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors — Part 1: Inch series shown in metric units

ISO 10767-3:1999  ISO

Estado: Published / 1999-12-02

Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 3: Method for motors

ISO 10767-2:1999  ISO

Estado: Published / 1999-10-07

Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 2: Simplified method for pumps

ISO 4392-3:1993  ISO

Estado: Published / 1993-12-23

Hydraulic fluid power — Determination of characteristics of motors — Part 3: At constant flow and at constant torque

ISO 4412-1:1991  ISO

Estado: Published / 1991-08-29

Hydraulic fluid power — Test code for determination of airborne noise levels — Part 1: Pumps

ISO 4412-2:1991  ISO

Estado: Published / 1991-08-22

Hydraulic fluid power — Test code for determination of airborne noise levels — Part 2: Motors

ISO 4412-3:1991  ISO

Estado: Published / 1991-08-22

Hydraulic fluid power — Test code for determination of airborne noise levels — Part 3: Pumps — Method using a parallelepiped microphone array

ISO 4391:1983  ISO

Estado: Published / 1983-06-01

Hydraulic fluid power — Pumps, motors and integral transmissions — Parameter definitions and letter symbols

ISO 3662:1976  ISO

Estado: Published / 1976-11-01

Hydraulic fluid power — Pumps and motors — Geometric displacements

ISO/CD 8426-1  ISO

Estado: Draft / 0--

Hydraulic fluid power — Determination of derived displacement of positive displacement pumps and motors — Part 1: Two-step Toet-method & Hydraulic fluid power

ISO/CD 8426-2  ISO

Estado: Draft / 0--

Hydraulic fluid power — Determination of derived displacement of positive displacement pumps and motors — Part 2: Zero-Pressure-Intercept-Method

ISO/DIS 10767-3  ISO

Estado: Draft / 0--

Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 3: Method for motors

UNE-EN 62364:2013  UNE

Estado: Anulada / 2022-02-19

Máquinas hidráulicas. Guía para el tratamiento de la erosión hidroabrasiva en turbinas Kaplan, Francis y Pelton. (Ratificada por AENOR en octubre de 2013.)

ISO 4409:2007  ISO

Estado: Withdrawn / 2007-03-29

Hydraulic fluid power — Positive-displacement pumps, motors and integral transmissions — Methods of testing and presenting basic steady state performance

ISO 10767-1:1996  ISO

Estado: Withdrawn / 1996-03-14

Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 1: Precision method for pumps

ISO 9632:1992  ISO

Estado: Withdrawn / 1992-05-14

Hydraulic fluid power — Fixed displacement pumps — Flow degradation due to classified AC Fine Test Dust contaminant — Test method

ISO 4392-2:1989  ISO

Estado: Withdrawn / 1989-08-10

Hydraulic fluid power — Determination of characteristics of motors — Part 2: Startability

ISO 4392-1:1989  ISO

Estado: Withdrawn / 1989-08-10

Hydraulic fluid power — Determination of characteristics of motors — Part 1: At constant low speed and at constant pressure

ISO 3019-3:1988  ISO

Estado: Withdrawn / 1988-10-27

Hydraulic fluid power — Positive displacement pumps and motors — Dimensions and identification code for mounting flanges and shaft ends — Part 3: Polygonal flanges (including circular flanges)

ISO 8426:1988  ISO

Estado: Withdrawn / 1988-10-13

Hydraulic fluid power — Positive displacement pumps and motors — Determination of derived capacity

ISO 4392-1:1988  ISO

Estado: Withdrawn / 1988-04-21

Hydraulic fluid power — Determination of characteristics of motors — Part 1: At constant low speed and at constant pressure

ISO 4392-2:1988  ISO

Estado: Withdrawn / 1988-03-31

Hydraulic fluid power — Determination of characteristics of motors — Part 2: Startability

ISO 4409:1986  ISO

Estado: Withdrawn / 1986-10-09

Hydraulic fluid power — Positive displacement pumps, motors and integral transmissions — Determination of steady-state performance

ISO 3019-2:1986  ISO

Estado: Withdrawn / 1986-08-14

Hydraulic fluid power — Positive displacement pumps and motors — Dimensions and identification code for mounting flanges and shaft ends — Part 2: Two- and four-hole flanges and shaft ends — Metric series

ISO 4412-2:1984  ISO

Estado: Withdrawn / 1984-05-01

Hydraulic fluid power — Test code for the determination of airborne noise levels — Part 2: Motors

ISO 3019-3:1981  ISO

Estado: Withdrawn / 1981-12-01

Hydraulic fluid power — Positive displacement pumps and motors — Dimensions and identification code for mounting flanges and shaft ends — Part 3: Polygonal flanges (including circular flanges)

ISO 3019-2:1980  ISO

Estado: Withdrawn / 1980-04-01

Hydraulic fluid power — Positive displacement pumps and motors — Dimensions and identification code for mounting flanges and shaft ends — Part 2: 2 and 4-hole flanges and shaft ends — Metric series

ISO 4412-1:1979  ISO

Estado: Withdrawn / 1979-11-01

Hydraulic fluid power — Test code for the determination of airborne noise levels — Part 1: Pumps

ISO 3019-1:1975  ISO

Estado: Withdrawn / 1975-02-01

Hydraulic fluid power — Positive displacement pumps and motors — Dimensions and identification code for mounting flanges and shaft ends — Part 1: Inch series shown in metric units