Busca tu norma

UNE-EN 10090:1998  UNE

Estado: Vigente / 2025-08-12

Acero y aleaciones para válvulas de motores de combustión interna.

UNE-EN ISO 8528-13:2017  UNE

Estado: Vigente / 2017-06-14

Grupos electrógenos de corriente alterna accionados por motores alternativos de combustión interna. Parte 13: Seguridad (ISO 8528-13:2016, versión corregida 2016-10-15)

UNE-EN 1679-1:1998+A1:2011  UNE

Estado: Vigente / 2014-01-01

Motores alternativos de combustión interna. Seguridad. Parte 1: Motores de encendido por compresión.

UNE-EN ISO 11102-1:2011  UNE

Estado: Vigente / 2011-01-26

Motores alternativos de combustión interna. Equipo de arranque accionado manualmente. Parte 1: Requisitos de seguridad y ensayos. (ISO 11102-1:1997)

UNE-EN ISO 14314:2010  UNE

Estado: Vigente / 2010-02-17

Motores alternativos de combustión interna. Dispositivos de arranque por cuerda enrollada. Requisitos generales de seguridad. (ISO 14314:2004)

UNE-EN ISO 11102-2:2009  UNE

Estado: Vigente / 2009-11-25

Motores alternativos de combustión interna. Equipo de arranque accionado manualmente. Parte 2: Método de ensayo del ángulo de desconexión. (ISO 11102-2:1997).

UNE-EN 1834-1:2000  UNE

Estado: Vigente / 2000-05-31

Motores alternativos de combustión interna. Requisitos de seguridad para el diseño y la fabricación de motores para atmósferas potencialmente explosivas. Parte 1: Motores del grupo II utilizados en atmósferas de gas y de vapores inflamables.

UNE 10101:1990  UNE

Estado: Vigente / 1990-10-10

Motores térmicos. Bombas de inyección. Tubos de alta presión para calibrado.

UNE 58503:1977  UNE

Estado: Vigente / 1977-09-15

Grúas móviles. Motores de combustión interna.

UNE 26340:1992  UNE

Estado: Vigente / 2025-06-11

Motores alternativos de combustión interna. Designación del sentido de rotación de los cilindros y de las válvulas en la culata, así como la definición de los motores en línea derecha e izquierda y emplazamiento sobre un motor.

UNE-EN ISO 8528-10:2022  UNE

Estado: Vigente / 2023-02-01

Grupos electrógenos accionados por motores alternativos de combustión interna. Parte 10: Medición del ruido aéreo (ISO 8528-10:2022) (Ratificada por la Asociación Española de Normalización en febrero de 2023.)

ISO 8528-6:2023  ISO

Estado: Published / 2023-11-06

Reciprocating internal combustion engine driven alternating current generating sets — Part 6: Test methods

ISO/TR 6307:2023  ISO

Estado: Published / 2023-09-20

Effect of conductivity on multipass testing as per ISO 4548-12:2017

ISO 4548-13:2023  ISO

Estado: Published / 2023-08-08

Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 13: Static burst pressure test for composite filter housings

ISO 11424:2023  ISO

Estado: Published / 2023-07-20

Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification

ISO 4548-14:2023  ISO

Estado: Published / 2023-03-24

Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 14: Hydraulic pulse durability for composite filter housings

ISO 8528-10:2022  ISO

Estado: Published / 2022-10-21

Reciprocating internal combustion engine driven alternating current generating sets — Part 10: Measurement of airborne noise

ISO 8528-12:2022  ISO

Estado: Published / 2022-08-30

Reciprocating internal combustion engine driven alternating current generating sets — Part 12: Emergency power supply to safety services

ISO 8528-5:2022  ISO

Estado: Published / 2022-06-29

Reciprocating internal combustion engine driven alternating current generating sets — Part 5: Generating sets

ISO 6826:2022  ISO

Estado: Published / 2022-05-25

Reciprocating internal combustion engines — Fire protection

ISO 6622-1:2021  ISO

Estado: Published / 2021-08-10

Internal combustion engines — Piston rings — Part 1: Rectangular rings made of cast iron

ISO 4548-6:2021  ISO

Estado: Published / 2021-06-08

Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 6: Static burst pressure test

ISO 8528-3:2020  ISO

Estado: Published / 2020-10-16

Reciprocating internal combustion engine driven alternating current generating sets — Part 3: Alternating current generators for generating sets

ISO 11102-1:2020  ISO

Estado: Published / 2020-08-26

Reciprocating internal combustion engines — Handle starting equipment — Part 1: Safety requirements and tests

ISO 4548-5:2020  ISO

Estado: Published / 2020-03-09

Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 5: Test for hydraulic pulse durability

ISO 3046-6:2020  ISO

Estado: Published / 2020-02-26

Reciprocating internal combustion engines — Performance — Part 6: Overspeed protection

ISO 19013-1:2019  ISO

Estado: Published / 2019-07-16

Rubber hoses and tubing for fuel circuits for internal combustion engines — Specification — Part 1: Diesel fuels

ISO 8528-2:2018  ISO

Estado: Published / 2018-06-22

Reciprocating internal combustion engine driven alternating current generating sets — Part 2: Engines

ISO 8528-1:2018  ISO

Estado: Published / 2018-02-02

Reciprocating internal combustion engine driven alternating current generating sets — Part 1: Application, ratings and performance

ISO 8528-7:2017  ISO

Estado: Published / 2017-07-21

Reciprocating internal combustion engine driven alternating current generating sets — Part 7: Technical declarations for specification and design

ISO 8528-9:2017  ISO

Estado: Published / 2017-07-21

Reciprocating internal combustion engine driven alternating current generating sets — Part 9: Measurement and evaluation of mechanical vibrations

ISO 4548-12:2017  ISO

Estado: Published / 2017-05-03

Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 12: Filtration efficiency using particle counting and contaminant retention capacity

ISO 15550:2016  ISO

Estado: Published / 2016-11-23

Internal combustion engines — Determination and method for the measurement of engine power — General requirements

ISO 8528-8:2016  ISO

Estado: Published / 2016-05-12

Reciprocating internal combustion engine driven alternating current generating sets — Part 8: Requirements and tests for low-power generating sets

ISO 8528-13:2016  ISO

Estado: Published / 2016-05-12

Reciprocating internal combustion engine driven alternating current generating sets — Part 13: Safety

ISO 19013-2:2016  ISO

Estado: Published / 2016-01-04

Rubber hoses and tubing for fuel circuits for internal combustion engines — Specification — Part 2: Gasoline fuels

ISO/TS 19425:2015  ISO

Estado: Published / 2015-12-09

Reciprocating internal combustion engines — Measurement method for air cleaners — Sound power level of combustion air inlet noise and insertion loss using sound pressure

ISO 4548-15:2014  ISO

Estado: Published / 2014-07-11

Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 15: Vibration fatigue test for composite filter housings

ISO 15619:2013  ISO

Estado: Published / 2013-09-13

Reciprocating internal combustion engines — Measurement method for exhaust silencers — Sound power level of exhaust noise and insertion loss using sound pressure and power loss ratio

ISO 3046-4:2009  ISO

Estado: Published / 2009-11-27

Reciprocating internal combustion engines — Performance — Part 4: Speed governing

ISO 4548-9:2008  ISO

Estado: Published / 2008-01-30

Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 9: Inlet and outlet anti-drain valve tests

ISO 3046-3:2006  ISO

Estado: Published / 2006-06-19

Reciprocating internal combustion engines — Performance — Part 3: Test measurements

ISO 21006:2006  ISO

Estado: Published / 2006-05-15

Internal combustion engines — Engine weight (mass) declaration

ISO 8528-4:2005  ISO

Estado: Published / 2005-06-07

Reciprocating internal combustion engine driven alternating current generating sets — Part 4: Controlgear and switchgear

ISO 14314:2004  ISO

Estado: Published / 2004-03-09

Reciprocal internal combustion engines — Recoil starting equipment — General safety requirements

ISO 14396:2002  ISO

Estado: Published / 2002-06-13

Reciprocating internal combustion engines — Determination and method for the measurement of engine power — Additional requirements for exhaust emission tests in accordance with ISO 8178

ISO 3046-1:2002  ISO

Estado: Published / 2002-05-09

Reciprocating internal combustion engines — Performance — Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods — Additional requirements for engines for general use

ISO 13774:1998  ISO

Estado: Published / 1998-02-26

Rubber and plastics hoses for fuels for internal-combustion engines — Method of test for flammability

ISO 4548-4:1997  ISO

Estado: Published / 1997-11-27

Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 4: Initial particle retention efficiency, life and cumulative efficiency (gravimetric method)

ISO 11102-2:1997  ISO

Estado: Published / 1997-09-25

Reciprocating internal combustion engines — Handle starting equipment — Part 2: Method of testing the angle of disengagement